Laboratory Incubator to 50°C -7,5L
Digital temperature control with LED display
Adjustable range from 5 to 45 °C
PID system with self-regulation for greater stability
7-liter capacity in a compact design
Integrated timer
Acoustic signal at the end of the cycle
Low energy consumption
Robust and easy-to-clean design
Over-temperature protection
Compact 7.5 Liter laboratory incubator with precise digital temperature control (5–45 °C), ideal for microbiology, quality control and educational applications.
The SBS-LI-8 laboratory incubator is a compact unit designed for the controlled incubation of samples in laboratory environments. Thanks to its PID control system with automatic self-regulation, it maintains a stable temperature with a variation of approximately ±2 °C.
Its operating range of 5 to 45 °C makes it ideal for microbiological cultures, stability testing, bacteriological incubation, and educational or quality control applications.
The unit features a digital display for viewing temperature and time, a configurable timer, and an audible signal upon completion of the process. Its internal chamber allows for proper air circulation for homogeneous incubation.
⚠️ It does not have a cooling function; the minimum achievable temperature depends on the ambient temperature.
1 × SBS-LI-8 or SBS-LI-8-12V Laboratory Incubator
1 × Power Cable (SBS-LI-8 model) or External Power Supply (SBS-LI-8-12V model)
1 × User Manual
Model: SBS-LI-8 / SBS-LI-8-12V
Capacity: 7 L
Temperature range: 5 – 45 °C
Temperature variation: ±2 °C
External dimensions: 300 × 330 × 330 mm
Internal chamber dimensions: 20 × 16 × 23 cm
Power: 70 W (12V) / 90 W
Voltage: 230 V / 50 Hz
Weight: 9 kg
Protection class: I / II (depending on model)
Control: Digital with PID system
Timer: Yes
Instructions for Use (Summary)
Place the unit on a stable, well-ventilated surface (at least 20–30 cm away from walls).
Connect to a power outlet.
Turn on the device using the ON/OFF switch.
Adjust the desired temperature using the “SET” button and the increment/decrement keys.
Set the incubation time if required.
Wait for the temperature to stabilize before adding the samples.
When the programmed time has elapsed, the device will emit an audible signal.
Remove the samples and turn off the device.
Cleaning: Disconnect before cleaning. Use only a damp cloth and non-corrosive products. Do not immerse in water.