Lucipac Pen AQUA
- Unique swab stick allows uniform sampling and thereby excellent reproducibility and accuracy
- Easy to use
- Samples 50% more liquid than comparable products
- Less than 2%% deviations in sample volumes
- Rapid detection
| Verpackungsgröße: 100 Stück |
LuciPac Pen-AQUA is a kit for testing cleanliness levels of water and other liquid samples using firefly luciferase enabled bioluminescence techniques. Water and other liquid samples may contain ATP and/or AMP which might originate from microorganisms propagating in such samples, and improper cleaning of facilities. This device measures ATP+AMP levels immediately, indicating inefficient cleaning processes. For example, inadequate microbiological control of coolant or other industrial process water can be promptly detected using LuciPac Pen-AQUA.
This kit uses an enzyme cycling method based on a combination of luminescent reactions from firefly luciferase and pyruvate, orthophosphate dikinase (PPDK). This method produces a given amount of luminescence that is proportional to the amounts of adenosine triphosphate (ATP) and adenosine monophosphate (AMP) present in the sample.
100 Swabs/Kit (5 packs with 20 swabs each)
Storage: 2-8°C, DO NOT FREEZE
Shelf life: 15 Months (after production date)
Remove the sampling stick from the main body (casing).
Soak sampling stick about 3 cm from the tip of the sampling stick into water or other liquid samples and shake gently. Make sure no bubbles remain within sampling stick's comb.
Pull out the sampling stick slowly and straight up from the sample.
Return the sampling stick to the main body (casing) and push it all the way into the main body.
Push firmly onto LuciPac Pen-AQUA casing and agitate.
Allow the luminescent reagent to thoroughly dissolve.
Insert the LuciPac Pen-AQUA into the measurement chamber of Lumitester SMART and close the chamber cover.
Press the ‘ENTER’ key. The results are obtained in 10 secs.