Laboratory Incubator to 65°C -12,8L.
Digital temperature control with LED display
Temperature range up to 65 °C
PID control system for stable and accurate heating
12.8 L chamber capacity
Integrated timer function
Acoustic signal at the end of the cycle
Uniform air circulation for homogeneous incubation
Overheating protection
Compact and robust laboratory design
Easy-to-clean interior
Compact 12.8 L laboratory incubator with precise digital temperature control up to 65 °C – ideal for microbiology, quality control, research, and educational applications.
The SBS-LI-12 laboratory incubator is designed for controlled incubation processes in laboratories, research facilities, and quality control environments. With a temperature range from ambient +5 °C up to 65 °C, it provides reliable conditions for microbiological cultures, sample conditioning, stability testing, and general laboratory applications.
Equipped with a PID controller featuring automatic self-tuning, the unit ensures stable temperature performance with minimal deviation. The digital LED display allows precise monitoring of temperature and time settings.
The integrated timer enables defined incubation cycles, and an acoustic signal alerts the user when the set time has elapsed. The compact housing makes it suitable for benchtop use while maintaining sufficient internal space for various sample containers.
⚠️ The device does not include active cooling. The minimum achievable temperature depends on the ambient temperature.
1 × Laboratory Incubator SBS-LI-12
1 × Power cable
1 × Shelf insert
1 × User manual
Model: SBS-LI-12
Capacity: 12.8 L
Temperature range: Ambient +5 °C to 65 °C
Temperature accuracy: approx. ±2 °C
Control system: Digital PID controller
Power: approx. 160 W
Voltage: 230 V / 50 Hz
External dimensions: approx. 355 × 390 × 420 mm
Internal dimensions: approx. 250 × 200 × 260 mm
Weight: approx. 12 kg
Protection class: I
Timer: Yes
- Place the incubator on a stable, level surface with at least 20–30 cm clearance from surrounding walls.
- Connect the unit to the power supply.
- Switch on the device using the ON/OFF button.
- Press the “SET” button to adjust the desired temperature using the arrow keys.
- Set the incubation time if required.
- Allow the chamber to reach and stabilize at the target temperature before inserting samples.
- Once the programmed time has elapsed, an acoustic signal will sound.
- Remove samples and switch off the unit after use.
Cleaning:
Disconnect from the power supply before cleaning. Use a soft, damp cloth and non-corrosive cleaning agents. Do not immerse the device in water.